Trailer Jetters

Harben › Sewer Jetters › Trailer Jetters

Harben Trailer Jetters

Trailer JettersE-180 · ES-12 · ET-180 · Hot Water

Tow-behind Harben jetters for cities, plumbers and drain contractors. 3,000 to 4,000 PSI, 300 to 750 gallons of water and a run-dry pump that won’t quit when the tank does. This is our own demo trailer at the shop in Kensington, MN.

✓ Minnesota State Contract✓ Run-dry P-Type pump✓ Demo at your shop
4,000 PSIUp to 18 GPM
750 GALBiggest tank (ET-180)
140°FHot water option
5 YRPump warranty
Pick Your Trailer

Four trailers, one pump you can trust

Same Harben build quality and run-dry pump on every one. Choose by pipe size, water on board and how big a trailer you want to pull.

Harben trailer jetter at Jet Line in Kensington MNHarben E-180 control panelHarben P-Type pump on our demo trailer
Single axle · the all-rounder

E-180

The most popular Harben trailer. 4,000 PSI at 18 GPM with a 375 gallon tank on a single axle trailer, and a 180° hydraulic pivoting reel so you can work off the back or the side.

4,000 PSIPressure
18 GPMFlow
375 GALWater tank
180°Pivoting hose reel
SINGLEAxle
UP TO 18″Line size
Harben ES-12 compact trailer jetterHarben ES-12 trailer jetterFitting a jetter nozzle
Compact · light to tow

ES-12

Built for smaller lines and smaller trucks. 3,000 PSI at 12 GPM, a 300 gallon tank and about 5,900 lb fully loaded, with a Kubota diesel and an antifreeze system.

3,000 PSIPressure
12 GPMFlow
300 GALWater tank
300 FT1/2″ hose
~5,900 LBLoaded weight
UP TO 12″Line size
Harben ET-180 twin axle trailer jetterHarben ET-180 trailer jetterHarben wireless remote
Twin axle · twice the water

ET-180

Everything in the E-180 with a 750 gallon tank on a twin axle trailer. More water means longer runs between fills on big mains and storm lines.

4,000 PSIPressure
18 GPMFlow
750 GALWater tank
180°Pivoting hose reel
TWINAxle
7-CHWireless remote option
Harben ET-180 Hot Water trailer jetterHarben ET-180 Hot Water jetterHigh pressure water jet
Heated · grease & ice

ET-180 Hot Water

The ET-180 with hot water. Heat cuts through grease, hardened buildup and mineral deposits, and helps on frozen lines. The Harben pump can be set up for water up to 140°F.

4,000 PSIPressure
18 GPMFlow
750 GALWater tank
UP TO 140°FHot water
TWINAxle
GREASELines & lift stations
Side by Side

Compare the lineup

ModelPSI / GPMWaterAxleBest for
ES-123,000 / 12300 galSingle, ~5,900 lb loadedDrains and lines up to 12″
E-1804,000 / 18375 galSingleSewer lines up to 18″, everyday city work
ET-1804,000 / 18750 galTwinLong runs, storm and bigger mains
ET-180 Hot Water4,000 / 18750 galTwinGrease, buildup and frozen lines
Built In

What you get on every Harben trailer

Harben pump and hose reel

Hydraulic reel

Reel speed control lets your operator pull the hose back at the right pace, so the debris comes out with it.

Harben Jump Jet control

Jump Jet option

Pulses the water to help the nozzle climb past sags and bends while using less water.

Harben 7 channel wireless remote

Wireless remote

Optional 7-channel remote so one person can run the jetter from the manhole.

The Harben Difference

A pump that can run dry

Every Harben jetter is built around the Harben P-Type diaphragm pump. Run out of water and it keeps spinning without damage, so one mistake on a cold morning doesn’t take your jetter out of service.

  • DRYRuns dry without damage, the only high pressure pump of its kind
  • 5 YRStandard 5 year warranty on the P-Type pump
  • 150µFiltration to 150 microns, so dirty water won’t stop it
  • 140°Can be set up for hot water up to 140°F
Harben P-Type run-dry pump on our demo trailer
Photos

Our demo trailers and the Harben lineup

Harben trailer jetter at Jet Line in Kensington MNHarben trailer jetter with rear hose reelChase Johnson with a Harben demo jetterHarben jet cartHarben E-180 trailer jetter
Why Buy From Jet Line

Your Harben dealer for the Upper Midwest & Mountain West

Jet Line sells and services Harben in Minnesota, North Dakota, South Dakota, Iowa, Nebraska, Montana, Idaho, Wyoming, Colorado and Utah.

Buy on contractHarben is on the Minnesota State Contract, so cities, counties and schools can skip the bid process.
Demo at your shopWe keep Harben trailer jetters for demos and bring one to your shop or job site from Kensington, MN or Salt Lake City, UT.
Parts & servicePump parts, nozzles and hose in stock, plus setup and operator training when your jetter is delivered.
FinancingFlexible financing with payments deferred up to a year through our lending partner.

More Harben Jetters

FAQ

Common questions

Which Harben trailer jetter is right for us?

For drains and lines up to 12″, the ES-12 is light and easy to tow. For everyday sewer work up to 18″, most cities pick the E-180. If you need more water for long runs, go ET-180, and if grease or ice is your problem, the ET-180 Hot Water. Our jetter sizer can help.

What does “run dry” mean?

The Harben P-Type diaphragm pump can keep running with no water in it without being damaged. If a tank runs empty or a supply line freezes, you don’t lose the pump. It comes with a standard 5 year pump warranty.

Can we see one run before we buy?

Yes. We keep Harben trailer jetters for demos and will bring one to your shop or job site so your crew can run it. Demos run out of Kensington, MN and Salt Lake City, UT.

Can a city buy a Harben on contract?

Yes. Harben is on the Minnesota State Contract, so Minnesota cities, counties and schools can buy without going out for bids. Ask us about cooperative purchasing in the other states we cover.

Do you service Harben jetters?

Yes. We stock pump parts, nozzles and hose, and we set up and train your crew when the jetter is delivered.

Pull a Harben to your next job

Tell us what you clean, how often and how you haul it, and we’ll match you with the right Harben.