Cretex SealsChimney, joint & lid seals
Stop inflow and infiltration at the manhole chimney, the joints and the lid. Mechanical Cretex seals for new manholes and rehab, sold and supported by Jet Line.
Cretex Seals
Stop inflow and infiltration where manholes leak most: the chimney, the joints and the lid. LSS internal and X-85 external chimney seals, internal manhole and pipe joint seals, Cretex Wrap external joint wrap, lid plugs, lid gaskets and EZ-Stik butyl sealant.



Cretex Seals
Stop inflow and infiltration where manholes leak most: the chimney, the joints and the lid. LSS internal and X-85 external chimney seals, internal manhole and pipe joint seals, Cretex Wrap external joint wrap, lid plugs, lid gaskets and EZ-Stik butyl sealant.
Seal it once, for the long haul
The chimney, where the frame sits on the cone, moves with frost and traffic and is where most manholes leak. The American Society of Civil Engineers reported that mechanical chimney seals cost about the same as applied coatings but last 2.5 times longer.
- 2.5XLonger life than applied chimney seals, at about the same cost
- 50Year warranty on the LSS internal chimney seal
- I&ILess clear water to pump and treat, more plant capacity
- EASYMechanical install: no primers, torches or chemical bond

Which seal fits?
| Product | Where it goes | Key specs | Warranty |
|---|---|---|---|
| LSS Internal Chimney Seal | Inside, frame to chimney | 4 widths, 0–24″ vertical, fits 20% diameter range | 50 years |
| X-85 External Chimney Seal | Outside, casting to cone | EPDM, C-band, up to 12″ of adjustment | 25 years |
| Internal Joint Seal | Inside manhole & pipe joints | 7.5″ rubber, ASTM C-923, 304 stainless band | Ask us |
| Cretex Wrap | Outside manhole & pipe joints | ASTM C-877 Type II, passes C-1244 vacuum | Ask us |
| Lid Plugs & Gaskets | Manhole lid holes & lid seat | Plugs for 3/4″–1-1/2″ holes, lids ≤1″ thick | Ask us |
A seal for every leak point
Pick by where the water is getting in.
LSS Internal Chimney Seal
Rubber sleeve with 16 ga stainless expansion bands, set from inside the manhole. Four widths span 0–24″ vertical with no extensions. .130″ min. rubber to ASTM C-923. 50-year warranty.
X-85 External Chimney Seal
EPDM seal between the casting and the cone. A C-shaped band compresses the sealing fins and locks onto the frame. Spans up to 12″ of adjustment, works above or below grade. 25-year warranty.
Internal Manhole & Pipe Joint Seal
7.5″ rubber compression seal with a Type 304 stainless band, set inside manholes and pipe with an expansion tool. Teardrop fins handle offsets and movement.
Cretex Wrap External Joint Wrap
Reinforced collar with mastic, cinched by steel straps on each side of the joint. Seals manhole and pipe joints for new construction and fixes. ASTM C-877 Type II.
Lid Plugs & Lid Gaskets
Removable rubber plugs for pick and vent holes, and molded or extruded gaskets that seal the lid to the frame and stop rattle.
EZ-Stik Butyl Sealant
All-weather butyl rubber joint sealant in rope form for making manholes and other underground concrete structures watertight.
Your rehab & repair partner
Jet Line sells, demos and supports pipe and manhole repair from Kensington, MN and Salt Lake City, UT.
More Rehab & Repair
Common questions
Internal or external chimney seal?
The LSS internal seal goes in from inside the manhole, so it is the go-to for rehab with no digging. The X-85 external seal wraps the outside of the frame and cone, best on new construction or when the area is already dug up.
How do we size an LSS seal?
The LSS sleeve comes in four widths that cover 0 to 24 inches of vertical chimney with no extensions, and one size fits a 20% range of frame and chimney diameters. Send us your measurements and we’ll pick the size.
What is the internal joint seal made of?
7.5″ wide rubber that meets ASTM C-923 with a Type 304 stainless steel expansion band (ASTM A-240). A two-person crew sets it with an expansion tool, with no primers, torches or chemical bond.
Where does the Cretex Wrap work?
On manholes and on round, elliptical, oval and arched pipe, tongue-and-groove and bell-and-spigot joints, wet or dry. It meets ASTM C-877 Type II and passes the ASTM C-1244 vacuum test.
How do we stop water coming in through the lid?
Rubber lid plugs fill pick and vent holes (six sizes, 3/4″ to 1-1/2″, in lids up to 1″ thick) and pull out with pliers. Lid gaskets with a triangular outer rib seal the lid to the frame and stop lid rattle.
What does the warranty cover?
Cretex warrants its classic internal and external chimney seals for 50 years on the original install, covering replacement seals and stainless bands. Labor, site prep and freight are not covered.
Where do you sell Cretex seals?
Minnesota, North Dakota, South Dakota, Montana, Wyoming, Colorado and southern Idaho.
Can a city buy these on contract?
Rausch and QuickLock are on Sourcewell and the Minnesota State Contract. Ask us about Cretex products for your project.
Can we see it first?
Yes. We demo QuickLock, PRO-RING and Rausch Rehab equipment in your own pipes and manholes, with your crew.
Get a Cretex Seals quote
Tell us what you clean, how often and how you haul it, and we’ll match you with the right repair.




