QuickLock Point Repair

QuickLock

Brand:

Brand Logo: QuickLock

OPTIONS

  • QuickLock Point Repair
  • QuickLock Flex for Offset Joints: The QuickLock Flex Sleeve is a no-dig point repair system for repairing joint offsets or axial bending inside the pipe.
  • QuickLock BIG: The QuickLock BIG sleeve is a product for permanently sealing leaking joints, radial and longitudinal cracks in accessible ducts and shafts from 32″.
  • QuickLock Liner End Piece: The QuickLock Liner End Sleeve is an innovative method to seal and protect CIPP liners where they enter and connect to the manhole.
Request Information

Download Brochure 
quicklock
quicklock
quicklock
quicklock
quicklock
quicklock flex

PRODUCT OVERVIEW

 Sleeve Sizes are Available from 6″ to 32″ in Circular Pipe Diameter

QuickLock is a strictly mechanical point repair system for the inside repair of pipes. No resin is involved. This revolutionary system consists of only (2) components: a 316L stainless steel sleeve structural body, covered by a seamless EPDM compression seal. Through the manhole the sleeve is inserted into the pipe and placed over the damaged section. Using an inflatable packer, the sleeve is then expanded and permanently locked into position.

APPLICATION FOR:

  • Municipal sewage lines
  • Well and potable water piping systems
  • Leaking and/or offset joints
  • Root intrusion
  • Holes, longitudinal & circumferential cracks
  • Abandon laterals
  • Restore structural integrity of pipe prior to lining
  • Meets ASTM F3110-14 Standard

NOT APPLICABLE FOR:

  • Fixing collapsing pipes
  • Pipes with an inner pipe pressure above 220psi*
  • Industrial sewage (except when corrosion levels have been inspected)

*The precondition for a long-term sealing of pressure pipes is there must be a diffusion resistant inner surface of the pipe. QuickLock installations larger than 16″ in diameter are only proven to withstand internal pressure up to 145psi.

Request Information

Additional Details

EFFICIENT SOLUTIONS

EFFICIENT SOLUTIONS

Installation is quick and easy while ensuring a permanent fix. QuickLock sleeves can be installed with flow present due to the fact that the packer is hollow; allowing for the flow pass through. The installation packer can even be attached to most tractor brands currently on the market.  The reduction in diameter is minimal. NSF/ANSI Standard 61 Certified for potable water.

ADVANTAGES

ADVANTAGES

  • Trenchless no-dig spot repair
  • Permanent, reliable, and instant fix
  • Passes air & water pressure testing.
  • Reinstates structural strength & integrity of deformed and damaged pipe.
  • Can be installed with flow present.
  • Easy and quick installation – no cure time.
  • Applicable for internal pressure up to 220 psi*

INSTALLATIONS

INSTALLATION PROCESS

  • Determine if correct application for QuickLock.
  • Determine exact pipe ID.
  • Determine damage length.
  • Prepare the QuickLock sleeve.
  • Load the sleeve on the QuickLock Packer.
  • Deliver the QuickLock sleeve to the installation.
  • Inflate the Packer to install the sleeve.

REQUIRED MATERIALS & TOOLS

  • Sharp knife
  • Talcum powder
  • Super glue
  • Biodegradable penetrating oil or food-grade lubricant
  • Air hose
  • Air compressor
  • QuickLock Packer

EXTRA TOOLS

  • Hydrophilic Waterstop – Where there is heavy groundwater infiltration and the pipe has a rough surface structure, we recommend using an additional hydrophilic waterstop affixed to the rubber gasket to ensure a tight seal.
  • Flexible Mortar/Grout Material – When there is existing root penetration, apply this material to the outside of the rubber gasket to prevent roots from growing and penetrating the rubber.

Product Video

youtube-video-thumbnail

From Our Customers

We ordered a new Rausch mainline and lateral launch system and received it in June. Not only is this system very high quality, but it is user friendly as well. It has sped up our lateral launching considerably. You can go from televising a mainline to converting to the lateral launch setup in about two minutes. Also the maneuverability of the lateral launch lets you place the lateral head right into the mouth of the lateral before launching. We have also started using USB jetting nozzles and I have gotten nothing but positive feedback from the field.

Andrew B.

Pipe Detectives

Interested In More Information Or Pricing?

Please use the form below and we will be in touch.

Name(Required)
This field is for validation purposes and should be left unchanged.

Our Experts Are Here To Help

Our team of experts is always available to help you select the right equipment for your specific needs and provide training and support to ensure you get the most out of your investment. We understand the importance of having reliable equipment, and we stand behind every product we offer with excellent customer service.